ECOFLOW RIVER 2 Pro Portable Power Station - 768Wh LiFePO4 Battery (5 Years Warranty)

Warranty: 5-Years Free Repair Warranty (Battery for 1 year)!

The Fenix HM65R-T V2.0 is a high-performance professional trail running headlamp. Powered by an included 3400mAh battery, the headlamp delivers a max output of 1600 lumens. Its max runtime could reach up to 300 hours at the 5-lumen Eco output. With a body made from magnesium alloy, the Fenix HM65R-T V2.0 has IP68-rated protection and 2 meters of impact resistance.

The included two-way widened adjustable headband provides extra comfort and convenience for a perfect fit while on the run. It is recommended to use the Fenix HM65R-T V2.0 for trail running trips where you will need to light your path in a comfortable and hands-free way.

- 1600 lumens maximum output and 170 meters maximum beam distance.
- Fitted with one Luminus SST40 white light LED and one OSRAM GW PUSTA1.PM warm white light LED; with a life span of 50,000 hours.
- White and warm white light sources for various lighting demands.
- Quality aluminum, magnesium and PC made - lightweight and durable.
- Powered by a 3400mAh battery, with a maximum runtime of 300 hours.
- Dual top switches for easy and fast operation.
- Single-handed operation with the new two-way SPORT headband fit system.
- An emergency whistle is attached to the headband to enhance users safety.
- Battery level indication and USB Type-C charging port.
- IP68 rated protection and 2 meters impact resistance.
- Reverse polarity protection, to protect from improper battery insertion.
- Lockout function and widened controls cover avoid accidental activation.

Press and hold either of the two switches for 0.5 seconds to turn on/off the lamp.

- With the lamp switched off, press and hold either of the two switches for 0.5 seconds to reach the corresponding mode.
- White light mode and warm light mode cannot be operated at the same time.
- Press and hold either of the two switches for 1.2 seconds to enter the SOS mode.

- White light mode: with the lamp switched on, single click the white light switch to cycle through Low Med High.
- Warm white light mode: with the lamp switched on, single click the warm white light switch to cycle through Eco Low Med High.

- In white light mode, single click the warm white light switch to shift to the Eco output of warm white light mode.
- In warm white light mode, single click the white light switch to shift to the Low output of white light mode.

- Lock: With the lamp switched off, simultaneously press and hold the two switches for 3 seconds, the lamp will blink 4 times on the Eco output of warm white light mode to indicate locked status.
- Unlock: With the lamp locked, simultaneously press the two switches for 3 seconds, the lamp will be activated with 4 blinks and activates on the Eco output of warm white light mode.

In locked status, clicking or pressing the switches will activate 4 blinks on the Eco output of warm white light mode to indicate locked status.

Adjust the headlamp to reveal the charging port on the back. Uncover the anti-dust cap and plug the USB Type-C side of the charging cable into the charging port of the lamp.With the headlamp switched off, the normal charging time of the Fenix ARB-L18-3400 battery is about 3 hours from depleted to fully charged with a 5 V/2 A charging adapter. Only Low output of white light mode and Low output of warm white light mode can be operated while charging.Once charging is completed, be sure to close the anti-dust cover.

With the lamp switched off, single click either switch to check the battery status. Single click once again the indicator(s) will go out immediately, or without any operation the indicator(s) will last for 3 seconds. Each time the light is turned on, the indicator(s) will show the battery level and will last for 3 seconds.

- Four lights on: 100% - 80%
- Three lights on: 80% - 60%
- Two lights on: 60% - 40%
- One light on: 40% - 20%
- One light flashes: 20% - 1%

Unscrew the battery cover anticlockwise to insert the battery with the anode side (+) towards the inner side, then screw the battery cover back on.

The lamp will accumulate a lot of heat when used at high output levels for extended periods. When the lamp reaches a temperature of 60°C/140°F or above, it will automatically step down a few lumens to reduce the temperature. When the temperature drops below 60°C/140°F, the lamp will gradually recall the preset output level.

When the voltage level drops below the preset level, the headlamp is programmed to downshift to a lower brightness level until Eco output is reached. When this happens in Eco output, one of the battery level indicators blinks to remind you to timely recharge or replace the battery till the battery runs out.

Rotate the dial clockwise to tighten the headband, and rotate the dial counterclockwise to loosen the headband. When the headband hits its maximum length, keep loosening the headband and the operation direction will reverse.

- Disassembling the sealed head can cause damage to the lamp and will void the warranty.
- Fenix recommends using an excellent quality battery.
- If the lamp will not be used for an extended period, remove the battery, or the lamp could be damaged by electrolyte leakage.
- Turn off and lock the lamp or take out the battery to prevent accidental activation during storage or transportation.
- Long-term use can result in O-ring wear. To maintain a proper water seal, replace the ring with an approved spare.
- Periodic cleaning of the battery contacts improves the lamp's performance as dirty contacts may cause the lamp to flicker, shine intermittently or even fail to illuminate for the following reasons:

A: The lamp is locked.
Solution: Simultaneously press and hold the two switches for 3 seconds to unlock the lamp.

B: Poor battery level.
Solution: Recharge or replace the battery (Ensure battery is inserted according to the manufacturer's specifications).

C: The threads, PCB board contact or other contacts are dirty.
Solution: Clean the contact points with a cotton swab soaked in rubbing alcohol.

We can only process ONEorder per customer at a time.